Bill of Materials

• lcd display - http://www.ebay.com/itm/360730910251
• circuit board - http://www.appfruits.com/2014/11/custom-lcd-controller-for-printrbot-simple-metal/
• trim pot - http://www.ebay.com/itm/231564329127
• 14 Pin Connector - http://www.amazon.com/gp/product/B00X7763X6
• R1 Resistor
  • Ended up using a 100 Ohm resistor
• Capacitor
  • .1uf
    • marked 104 on ceramic capacitors (the ones with a circle top and look like a small brown M&M)

Through Hole Components, LCD with Rotary Button PCB, and Connector Cable

This is a photo of the through hole components :

This is a photo of the through hole components with the LCD PCB and connector cable: